Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
GAF Roof Installation in Woodland Hills: What to Know First
GAF roof installation in Woodland Hills typically runs $8,500 – $18,500 for a full tear-off and replacement on a standard single-family home, and most jobs take 3 – 5 working days once materials land. We’re an independent GAF service provider, not a manufacturer-authorized dealer, which means we recommend the best GAF product for your specific roof rather than pushing whatever line earns the biggest rebate. If you’re weighing a repair against a full install, call (650) 456-5615 and we’ll give you a straight answer.
This page is for Woodland Hills homeowners who already know the GAF name or have a GAF roof that’s failing. You’ll find real failure patterns we see in this climate, what we do differently on a GAF install, and honest price ranges before you ever pick up the phone.
What to Know About GAF Roof Installation in Woodland Hills
Key takeaways:
- GAF Timberline HDZ and Timberline Ultra HD are the two lines we recommend most for Woodland Hills homes based on wind exposure and the valley’s summer heat.
- We’re independent, so we quote GAF, Owens Corning, and CertainTeed on the same job when it makes sense, and you decide.
- Every install gets a written price before work starts, photo documentation before and after, and a live trackable arrival time.
Styles & brands we work with






How GAF Products Fail – and How We Fix Them
- Granule loss on GAF Timberline Natural Shadow (pre-2010 runs). We still see these older three-tab GAF roofs around the Warner Center corridor and some of the 1970s tracts south of Ventura Boulevard. The asphalt matrix was thinner on those early runs, and after 15-plus years of valley sun, granules start sloughing off into the gutters. You’ll see dark patches where the fiberglass mat shows through. Our fix on a roof this age is almost always a full replacement rather than a patch, because the underlying felt is usually in the same condition.
- Wind-lifted shingle tabs on GAF Timberline HDZ along ridge lines. Woodland Hills gets those late-afternoon Santa Ana gusts that come over the Santa Monica Mountains and hit the north-facing slopes hard. GAF’s LayerLock sealant strip is rated for high wind, but we regularly find shingles that never fully bonded because installation happened in cooler temperatures or on a dusty deck. The tell is a shingle edge you can lift with two fingers. We repair these by hand-sealing each lifted tab with a bead of roofing cement, but the honest conversation is that if more than 15 percent of the roof is affected, a new install is the smarter money.
- Leaks at the pipe boot flashings on GAF installs from the mid-2010s. The shingles hold up, but the neoprene boots around plumbing vents crack after a decade of sun exposure, and water tracks down the pipe. On a GAF roof in Woodland Hills, we routinely see this on homes built during the 2014 – 2016 construction boom out by the Westfield Topanga expansion. We replace with a lead or silicone boot that outlasts what was originally installed, then re-seal the shingles around it.
- Improperly nailed GAF Slateline shingles losing their profile. Slateline is a heavier shingle meant to mimic shake, and it requires a specific nailing pattern. When a previous crew used fewer nails or the wrong nail gun pressure, the shingles eventually start to curl or pull loose, especially on the steeper pitches common to the hillside homes off Mulholland. We re-nail or replace as needed, and on a full Slateline install, we follow GAF’s exact fastener schedule, which is nine nails per shingle in high-wind zones.
- Ice-and-water shield skipped on low-pitch sections. Woodland Hills doesn’t get ice, but the building code still requires a self-adhered underlayment at eaves and valleys. Some older GAF installs skipped this step, and we find rot along the eaves where wind-driven rain pushed under the shingles. When we tear off a GAF roof, we always check what’s underneath and we photograph everything before the new materials go down.
Our GAF Roof Installation Process
- 1
Call and book. A live person answers at (650) 456-5615. We schedule a time that works, and you get a trackable arrival window through The Relay Standard, so you know who’s coming and when they’ll pull up.
- 2
Full tear-off and deck inspection. We remove the old GAF roof down to the decking, then check every sheet of plywood or OSB for rot, soft spots, or nail pops. You see photos of what we find before we proceed.
- 3
Underlayment and flashing. We install new underlayment, replace all pipe boots, and re-flash chimneys, skylights, and valleys. Flashing, the metal strips that seal joints around chimneys and vents, is where most roofs actually leak, so this step gets extra attention.
- 4
GAF shingle installation. We follow GAF’s published fastener schedule and sealant activation guidelines, which matters for the warranty and for how the roof performs in Woodland Hills wind conditions.
- 5
Cleanup and final check. We run a magnetic sweeper over the yard and driveway, inspect every ridge and valley, and walk the roof twice before we call it done.
- 6
Documentation and guarantee. You get before-and-after photos, a digital invoice by text, and our 365-Day Done Right Promise in writing. If any covered repair fails within a year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat GAF Roof Installation Costs in Woodland Hills
Here’s an honest look at what we see in this market:
- Full GAF Timberline HDZ tear-off and install on a 1,800 sq ft rancher: $8,500 – $11,500, depending on decking condition and roof pitch.
- Full GAF Timberline Ultra HD install on a two-story with complex valleys: $12,000 – $18,500.
- GAF Slateline or Camelot II install: $14,000 – $20,000 for a typical Woodland Hills home.
- Skylight re-flashing during install: $400 – $900 per skylight.
- Decking replacement (if rot is found): $75 – $110 per sheet, quoted before we proceed.
What moves the price is pitch, square footage, decking condition, and whether you’re on a hillside lot where we need a roof hoist. Every estimate is a written price before any work starts. The number on the page is the number on the invoice. Call (650) 456-5615 for an exact quote.
Why Woodland Hills Homeowners Call Crestview Roofing Co Woodland Hills for GAF Work
Most of our GAF customers in Woodland Hills come to us after a bad experience with another contractor. Someone gave them a verbal number and then the invoice looked different. Or a crew showed up hours late with no way to reach them. We built Crestview Roofing Co Woodland Hills to solve exactly that, because Dylan Pace spent two decades on these roofs before starting this company, and he knows what homeowners actually want: a real arrival time, a written price before work starts, photo proof the work was done, and a guarantee in writing. Every promise we make goes in writing, because a handshake doesn’t keep the rain out.
We install GAF, Owens Corning, and CertainTeed, so if a GAF line isn’t the right fit for your roof’s pitch or exposure, we’ll tell you and quote the better option instead. Our techs are background-checked and uniformed, and a live person answers the phone 24/7, including weekends.
FAQs
No. As an independent GAF service provider, we install using GAF’s published nailing and sealant guidelines, which keeps the manufacturer’s material warranty intact. The warranty on the shingles themselves is still GAF’s, not ours. What we add on top is our own 365-Day Done Right Promise, which covers our workmanship for a full year in writing, included with every job. Call (650) 456-5615 and we’ll walk you through how the warranties stack.
A standard GAF tear-off and install on a single-family home takes 3 – 5 working days once materials are on site. Hillside lots, steep pitches, or significant decking replacement can add a day or two. Before we start, you’ll get a written schedule and a live trackable arrival time each morning through The Relay Standard.
We use GAF shingles along with GAF underlayment and starter strips when the job calls for a full GAF system, because that’s what preserves the manufacturer’s system warranty. For flashings, pipe boots, and ventilation, we use materials we’ve proven out over years in Woodland Hills, sometimes choosing a third-party metal flashing that performs better in our wind conditions than the stock product. We’ll tell you exactly what goes on your roof and why before we start.
Sometimes, yes. If the roof is under 12 years old and the issue is limited to a single area, like a cracked boot or a few wind-lifted tabs, a repair makes sense. We’ll tell you honestly when a repair is throwing money at a roof that’s already past its useful life. Either way, the same written pricing and 365-Day Done Right Promise applies. Call (650) 456-5615 for a free estimate and we’ll tell you which path is actually worth it.
Written by Dylan Pace, Owner, Crestview Roofing Co Woodland Hills at Crestview Roofing Co Woodland Hills, serving Woodland Hills and nearby areas.