Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Woodland Hills?
Metal roof installation in Woodland Hills, CA typically runs between $14,500 and $42,000 for an average 1,800-square-foot home in 2026, with most homeowners paying around $24,000 for a standing seam system. The per-square-foot range lands between $8 and $22 depending on metal type, panel profile, roof pitch, and how much tear-off work is required. A straightforward reroof over an existing single layer using corrugated steel panels starts near the bottom of that range, while a full tear-off with hidden-fastener standing seam and underlayment upgrades pushes toward the top.
This guide breaks down real Woodland Hills numbers, what moves them, and where money typically gets spent. If you want a firm number for your specific roof, call (650) 456-5615 and we’ll put a written price in front of you before any work starts.
Key Takeaways
- Metal roof installation in Woodland Hills averages $24,000 for a 1,800 sq ft home, or roughly $8 to $22 per square foot.
- Standing seam runs $12 to $22 per sq ft installed; corrugated or exposed-fastener panels run $8 to $14 per sq ft.
- Woodland Hills roof pitch, access, and the Santa Ana wind season all affect final cost.
- You will pay for tear-off separately if your existing roof has two layers: budget $2 to $4 per sq ft.
- Crestview Roofing gives a written price before work begins, and every metal roof install is backed by the 365-Day Done Right Promise.
Metal Roof Installation Cost Breakdown (2026)
Here is how the numbers actually break down for the Woodland Hills market. These are installed prices, meaning materials, labor, fasteners, underlayment, trim, and cleanup are all included.
| Line Item | Typical Range (Woodland Hills, 2026) |
|---|---|
| Corrugated / exposed-fastener steel panels (installed) | $8 – $12 per sq ft |
| Standing seam steel (installed) | $12 – $18 per sq ft |
| Standing seam aluminum (installed) | $13 – $20 per sq ft |
| Standing seam zinc or copper (installed) | $20 – $35+ per sq ft |
| Full tear-off of existing roof | $2.50 – $4.50 per sq ft |
| Underlayment upgrade (high-temp peel-and-stick) | $0.75 – $2.00 per sq ft |
| Roof deck repairs (plywood replacement, typical) | $95 – $160 per 4×8 sheet, installed |
| Gutter replacement (if needed, standard aluminum) | $9 – $15 per linear foot |
| Permits (City of Los Angeles, roofing reroof) | $400 – $900 |
To anchor that into real-house terms: a 1,800 sq ft single-story ranch in the neighborhoods south of Ventura Boulevard, getting a standing seam steel roof with tear-off and new underlayment, should land between $24,000 and $32,000. That same house with corrugated panels and no tear-off lands closer to $15,000 to $18,000. The numbers above are not a substitute for an on-site measurement, but they will tell you whether a quote you get is in the right ballpark.
One note on the permit line: Woodland Hills falls under the City of Los Angeles Department of Building and Safety, and reroof permits are calculated on a valuation basis. Smaller houses pay less, larger houses more. If a contractor tells you a permit is “optional,” walk away. It is not optional, and unpermitted work creates a mess if you ever sell the house.
What Affects Metal Roof Installation Pricing in Woodland Hills
Two houses on the same street can be thousands of dollars apart on a metal roof quote. Here is what is actually doing the pushing:
- Roof pitch and complexity. A 4:12 walkable pitch is fast and safe to work on. A 8:12 or steeper roof south of the Boulevard means slower labor, more safety rigging, and a higher price per square foot. If your roof has more than four hips, valleys, or dormers, expect trim and flashing costs to climb because every transition is a hand-cut metal detail.
- Tear-off count. Los Angeles code allows two layers of roofing max. If your existing roof already has two layers (wood shake plus asphalt shingles is a common one in older Woodland Hills tracts), the code requires a full tear-off before metal goes on. That is $2.50 to $4.50 per sq ft you are adding before the new roof even starts.
- Deck condition. Houses in the Woodland Hills area built in the 1960s and 1970s often have plywood decking that is holding up. But in the hills, especially on the shaded north-facing slopes, we find dry rot at the eaves and around skylights more often than in the flats. Every sheet of plywood replaced adds $95 to $160 to the job.
- Panel profile and metal type. Corrugated exposed-fastener panels are the budget workhorse. Standing seam hides the fasteners entirely, which is why it costs $4 to $8 more per square foot. Going from steel to aluminum adds about a dollar a foot; zinc and copper are a different conversation entirely and mostly show up on custom modern homes in the hills.
- Insulation and underlayment choices. Metal roofs radiate less heat than asphalt, but the underlayment still matters. A high-temp peel-and-stick underlayment adds up to $2 per square foot and is worth it on vaulted ceilings and south-facing exposures where the San Fernando Valley sun hits hard in July and August.
- Access and staging. Houses on narrow hillside streets with no driveway parking for a material trailer can add $300 to $1,000 in logistics because material has to be shuttled. It is not a huge cost, but it shows up as a separate line item on honest bids.
If you want to know which of these factors apply to your specific roof, call (650) 456-5615 and we’ll walk it with you, no charge.
Metal Roof vs. Asphalt Shingle: What the Cost Difference Buys You in Woodland Hills
Asphalt shingle reroofs in Woodland Hills run $5.50 to $8.50 per square foot installed, so a comparable 1,800 sq ft home gets a new shingle roof for roughly $11,000 to $16,000. Metal runs $8 to $22 per square foot. That gap is real, and if you are planning to sell in three years, shingles are often the smarter financial move. But if you plan to stay, the arithmetic shifts.
A metal roof in this climate can last 40 to 60 years, roughly two to three times the realistic life of an asphalt shingle roof in Southern California sun. You are also paying for fire resistance. After the Woolsey Fire and the ember-driven fire behavior this area has seen, a Class A fire-rated standing seam or stone-coated metal roof carries weight in the hills north of the 101, where brush clearance and ember intrusion are part of the local reality. Insurance carriers in Los Angeles County have gotten aggressive about wildfire-risk roofs, and metal is one of the few materials that consistently satisfies their underwriting requirements.
Our metal roof installation services in Woodland Hills cover everything from tear-off to final inspection, with before-and-after photos so you can see what was done without climbing a ladder.
How to Save on Metal Roof Installation
None of these tips compromise the roof. They just remove waste from the process:
- Time it in the off-peak window. Roofing in Woodland Hills runs heaviest from May through September. Winter work, especially January through March, often prices $1 to $2 per square foot lower because crews have open capacity. Metal panels are installed with screws and seam work, not heat-sealed membranes, so cooler weather does not hurt quality.
- Do the tear-off at the same time. Trying to phase a project, where you replace half the roof now and half next year, creates two mobilization costs and two permit pulls. One-and-done is cheaper.
- Keep the current roof’s substrate if it passes inspection. If your decking is sound and you only have one layer up there, you can install metal over it and save thousands in tear-off and disposal. Two layers though, and code gets involved. We’ll tell you honestly which situation you are in.
- Pick the metal profile that matches the house. Corrugated panels look right on mid-century moderns and agricultural-style homes. Standing seam carries contemporary and custom architecture. Spending $20 per square foot on copper when a $14 per square foot steel standing seam would look identical from street level is not a roofing decision, it is a luxury decision. Both are fine, but know which one you are making.
- Ask what is included in the quote before you sign. The roofer who prices low because they left out underlayment, flashing, or permit costs will bill you for them mid-job. A written price with a full scope list is the best money-saving tool in this trade. Crestview Roofing provides one before any work begins, on every job, no exceptions.
The fastest way to know what your roof will actually cost is a free, on-site measurement. Call (650) 456-5615 and we’ll schedule it for a time that works for you, with a live arrival time you can track.
What to Expect During a Metal Roof Install: Cost and Timeline
Metal roofing is not a one-day job. For a standard 1,800 sq ft home in Woodland Hills, here is the realistic sequence:
- Day 1: Tear-off (if required), deck inspection, and any plywood repairs. Underlayment goes down. If your roof has a steep slope, expect an extra day for staging and safety setup.
- Days 2 to 4: Panel installation, trim, and flashing. Standing seam takes a bit longer than corrugated because the seams are field-seamed, not screwed through the face of the panel.
- Day 5: Ridge caps, final detailing, inspection, and a full clean-up. Metal roofs generate a lot of cut scrap, and every piece needs to be picked up, swept, and hauled away.
Most Woodland Hills metal roof installs finish in four to six working days. Weather delays are rare in this climate, but Santa Ana wind events in fall can shut down panel handling for a day or two because large metal sheets become unsafe to maneuver in high gusts. A responsible crew will stand down in 25+ mph winds rather than risk damage or injury.
Permits and Code Requirements in Woodland Hills
Woodland Hills is part of the City of Los Angeles, so roofing work falls under the Los Angeles Department of Building and Safety (LADBS). A reroof permit is required when more than 25% of the roof surface is replaced. Metal roof installs in this area must meet Title 24 energy requirements, which LADBS enforces with a cool-roof standard for most residential projects. Most metal roof colors are available in Title 24-compliant reflective coatings, but not all: if you pick a dark, non-reflective color, it may not pass compliance without additional documentation.
The permit itself runs $400 to $900 for a typical house. The contractor should pull it, not you. If a roofer suggests you pull the permit on your own as a “savings,” decline. The permit holder is the one who takes liability on the inspection, and you do not want that to be you.
How We Price Metal Roof Installation at Crestview Roofing
The way this company works is built around a specific promise: the written price you receive before work starts is the price on the invoice when the job is done. No add-on surprises at the door, no “we found additional damage” calls that double the number. If we find deck rot after tear-off, we send you a photo, show you the problem, and get written sign-off before any extra work happens.
Every metal roof we install is backed by the 365-Day Done Right Promise, in writing, at no extra cost. If a covered repair fails within a year, we correct it. No charge, no negotiation, no runaround. That is the same standard we apply to our roofing services across the board.
We also work with metal panels and roof systems from manufacturers that stand behind their products, including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Material quality is never a question mark on a Crestview job, because you will see the brand before you buy.
Dylan Pace leads the crew. When you call, you will talk to a live person, 24/7, and you will know the name of the technician coming to your home before they arrive. That is the Relay Standard: written price, live arrival time, before-and-after photo documentation, and a digital invoice sent by text.
FAQs – Metal Roof Installation Cost
Is it cheaper to repair or replace a metal roof?
Repair is almost always cheaper in the short term. A single panel replacement, fastener replacement, or seam re-seal in Woodland Hills runs $350 to $1,200 depending on access and location. Replacement, as covered above, runs $14,500 to $42,000. The better question is age: if your metal roof is under 15 years old, repair makes sense. If it is over 25 and problems are spreading, replacement is where the math points. For an exact assessment, call (650) 456-5615 and we will tell you straight.
How much does a standing seam metal roof cost in Woodland Hills?
Standing seam metal roof installation in Woodland Hills runs $12 to $18 per square foot for steel, or $21,600 to $32,400 for an 1,800-square-foot roof. Add $2.50 to $4.50 per square foot if tear-off is required. Hidden-fastener systems cost more than corrugated because the seams are mechanically seamed on site, but they last longer and have no exposed fasteners to maintain. Call (650) 456-5615 for a written price on your specific roof.
Can I install a metal roof over existing shingles to save money?
Yes, in many cases. If your existing roof has a single layer of shingles and the decking underneath is sound, Los Angeles code allows a metal roof to go over it. That saves $4,500 to $8,100 in tear-off and disposal costs on an 1,800-square-foot home. If you already have two layers, a tear-off is required before metal can go on. We will check the layer count and deck condition as part of the free estimate.
How long does a metal roof last in Woodland Hills’s climate?
A properly installed steel or aluminum metal roof in Woodland Hills lasts 40 to 60 years, compared to 20 to 30 years for architectural asphalt shingles in this sun-heavy climate. The UV exposure in the San Fernando Valley shortens the life of every roof, but metal’s resistance to heat degradation is the single biggest reason the higher upfront cost often pays off over two or three decades of ownership.
Will a metal roof lower my cooling bills in Woodland Hills?
A reflective, Title 24-compliant metal roof can cut cooling energy use by 10% to 25% in Woodland Hills, where summer temperatures routinely exceed 95°F. The exact number depends on insulation levels, roof pitch, and the reflective rating of the specific color and coating you choose. The effect is strongest on single-story homes with large south-facing roof planes.
How soon can you start a metal roof installation in Woodland Hills?
Typical lead time for a Crestview Roofing metal roof install is 7 to 14 days from signed contract to first day on site, depending on material availability and the permit queue at LADBS. If you are in an emergency situation, call (650) 456-5615 and we will tell you exactly what our schedule looks like today.
Get a Written Price for Your Woodland Hills Metal Roof
No guesswork, no vague ranges, no “trust me on this one.” Call (650) 456-5615 for a free estimate and we will measure your roof, walk you through the options, and hand you a written price before any work starts. You will know exactly who is coming, when they will arrive, what it will cost, and what proof you will receive after the job is done.
Written by Dylan Pace, Owner at Crestview Roofing Co Woodland Hills, serving the Woodland Hills area since 2000.
Pricing reflects the Woodland Hills market as of 2026. Crestview Roofing Co Woodland Hills offers free estimates – call (650) 456-5615.
What Our Customers Say
"Leak near the chimney. They resealed the flashing and I got before and after photos by text."
- Troy N."Easy communication all the way through. I never had to call the office, the texts answered every question."
- Denise A."Roof replacement. Crew texted the schedule daily and I could ask questions by message. Done in two days."
- Sandra J.